Garage epoxy questions, answered

It means everything we apply stays on your floor. Other companies use blends from 80/20 to 70/30: with a 70/30 blend, 30% of what goes down evaporates as it cures, leaving a shallower, less resistant floor. Our 100% solids formula cures thick, durable and resistant, which is why we can back it with a warranty on adhesion and hot tire pickup.

The average turnaround from start to finish is 2 to 3 days. Our products are engineered to be applied and cured to the thickest standards in the industry so you can get back to using your garage or patio as soon as possible.

We mechanically grind every floor. Cutting corners on preparation is a common cause of peeling, chipping and premature failure, so we never use acid-wash shortcuts. When the slab needs it, we add moisture mitigation before coating.

Every system we install is backed by our written warranty. On our polyaspartic garage and shop floors it covers adhesion and hot tire pickup: the coating stays bonded to the concrete and won't lift under hot tires. Ask us for the terms when you get your quote.

Many companies put down an epoxy base coat and use polyaspartic only for the clear topcoat. In garages and shops we build every layer from 100% solids polyaspartic, so the whole floor has its extreme durability and UV resistance: it resists stains, chemicals, hot tire pickup and yellowing. We use epoxy where it is the better fit, such as anti-static (ESD) floors for medical offices, spas and salons.

Both. Polyaspartic works as a colored base coat and as a clear topcoat, and we use it for both. Your floor gets a 100% solids polyaspartic base coat in your color, your flake blend, and a clear polyaspartic topcoat, one tough, UV-stable material from the concrete up.

Full polyaspartic flake floors for garages and shops, anti-static (ESD) epoxy for medical offices, spas and salons, and self-leveling and quartz-filled epoxy for commercial facilities and high-traffic environments. See our products for details on each.

Yes. Start with one of our base colors, then pick a flake blend. We have hundreds of options, including the flake, quartz, mica and glitter catalogs on our products page. Use the color chooser to send us your pick with your quote request.

A flake floor is slightly textured to the touch, which creates friction and resistance against slips and falls. Quartz-filled epoxy is another slip-resistant option.

It is built not to. The polyaspartic topcoat resists UV yellowing and hot tire pickup, and mechanically ground prep is what keeps the coating bonded instead of peeling.

No. Every floor is installed by our own professional installation teams, never subcontractors.

We are based in Eagle and serve Meridian, Boise, Star, Middleton, Nampa, Kuna, Hidden Springs, Donnelly, McCall and the Treasure Valley. See our Eagle, Meridian and Boise pages.

Yes. Our penetrating concrete sealer protects driveways, patios, porches, sidewalks, pool decks and garage floors from water, de-icing salts and freeze-thaw damage, with a service life of up to 22 years under normal conditions. It can even be applied to damp concrete. See concrete sealing.

Anti-static epoxy contains a conductive material that carries static electricity to ground and dissipates any potential discharge. We install it in medical and healthcare spaces and in spas and salons where it is needed, and it is also used in electronics manufacturing and areas at risk for combustible dust buildup.

Quotes are free and no-hassle. Send us a few details on the contact form or call (208) 585-7249, and we'll get back to you with a free quote.

Armor Flooring Idaho is a family-owned business that has been in the flooring business for 22 years, constantly learning new techniques and styles to meet our customers' needs.