Contact Us
Built for durability. Engineered for performance. Backed by a written warranty.
Most coating companies lay down an epoxy base and save polyaspartic for the clear topcoat. We build the whole floor from it.
A colored 100% solids polyaspartic base coat bonds to mechanically ground concrete, your flake blend goes into it, and a clear polyaspartic topcoat seals it. The same tough, UV-stable material runs through every layer, not just the surface. It is the standard in every garage and shop we coat, not an upgrade.
Our products are engineered to be applied and cured to the thickest standards in the industry, so you can get back to using your garage or patio as soon as possible. The average turnaround from start to finish is 2 to 3 days, always at a reasonable price.
Full polyaspartic for garages and shops; epoxy systems for medical, spa, salon and commercial spaces. Not sure which fits? Tell us about the space and we'll recommend the right one.
Our standard floor for every garage and shop, built from 100% solids polyaspartic in every layer: a colored polyaspartic base coat, your flake blend, and a clear polyaspartic topcoat. Most installers save polyaspartic for the clear top layer. We build the whole floor from it, so every layer resists hot tire pickup, chemicals, stains and UV yellowing. The flake adds a slightly textured feel that grips against slips and falls.
Where static needs controlling, we install conductive epoxy that carries static electricity to ground and dissipates potential discharge. Used in medical and healthcare spaces, spas and salons, electronics manufacturing and areas at risk for combustible dust buildup.
Applied over new, old or damaged concrete for a smooth, level surface. Colors and decorative designs can mark traffic patterns or highlight zones. Resists slips, heat and chemicals, finished with our 100% solids PolyBlend topcoat.
High-performance resin combined with colored quartz grains for a floor that is sanitary, slip-resistant and durable. Go subtle and understated, or vibrant enough to brighten any space.
Browse the full flake, quartz, mica and glitter ranges, or contact us for the full list.
The real process, no shortcuts. The average turnaround from start to finish is 2 to 3 days.
Send us a message or call. Tell us about your garage, shop or commercial space and we'll recommend the right system and give you an honest, no-hassle quote.
We grind the concrete mechanically, never an acid-wash shortcut, and mitigate moisture when needed. Prep is what keeps a floor from peeling.
A 100% solids polyaspartic base coat goes down in your color. Nothing evaporates, so the full thickness we apply stays on your floor.
Your flake, quartz or mica blend is broadcast into the base, then sealed with a clear 100% solids polyaspartic topcoat for UV, chemical and abrasion resistance.
The average turnaround from start to finish is 2 to 3 days. We'll tell you when you can walk on it and when you can park on it.
Tell us about your garage, shop or commercial space and we'll get back to you with a free quote.